- Your fast track to nitro truggy racing
- 4mm 6061-T6 Aluminum Chassis Plate
- Dynamite® .28 nitro engine with pull start
- Metal-gear transmission and sealed differentials
- Gen III radio tray for longer servo life
In The Box
- (1) 8IGHT 4WD Nitro Truggy RTR
- (1) Spektrum SLT 3-Channel SLT Radio System
- (1) Dynamite 1600mAh 6V NiMH receiver pack
- (4) AA Transmitter Batteries
- (1) 4-Way Cross Wrench
- (1) Product Manual
Needed to Complete
- (1) 20-30% Nitromethane fuel
- (1) Nitromethane-Approved Dispenser
- (1) NiMH Battery Charger with Rx charge lead
- (1) Glow Igniter
Overview
If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.
Features
- Your fast track to nitro truggy racing
- Spektrum SLT 3-Channel SLT Radio System
- Spektrum SLR300 Surface Receiver
- Spektrum™ S614 Waterproof Metal Gear Surface Servo, 23T
- 4mm 6061-T6 Aluminum Chassis Plate
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
Video Overview
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Product Specifications
| Power Type | Nitro |
| Gear Pitch | 1.0 Module |
| Servos | Included |
| Charger | Sold Separately |
| Differential | Fluid filled gear type |
| Receiver | Included |
| Shock Type | Composite body |
| Product Width | 16.38" (416 mm) |
| Radio | Included |
| Battery | Included |
| Fuel Tank Capacity | 4.2oz (125cc) |
| Approximate Assembly Time | No assembly required |
| Body | Painted and screen printed |
| Brakes | Dual disc |
| Pinion | 13T |
| Scale | 1/8 |
| Vehicle Type | Truggy |
| Vehicle Size | Standard |
| Internal Gear Ratio | 3.91:1 |
| Product Length | 18.75" (476 mm) |
| Spur Gear | 50T |
| Suspension | 4-wheel independent |
| Ball Bearings | Full set |
| Chassis | 4mm 6061 T-6 aluminum |
| Completion Level | Ready-To-Run |
| Drivetrain | 4WD |
| Product Height | 7.3" (185 mm) |
| Final Drive Ratio | 15.03:1 |
| Wheelbase | 14.93" (379 mm) |
