Traxxas 1/10 E-Maxx Brushless 2.4GHz TQi MXL-6S RTR

  • Traxxas 1/10 E-Maxx Brushless 2.4GHz TQi MXL-6S RTR

$ 659.99   On Sale  $ 1,210.00


Traxxas 1/10 E-Maxx Brushless 2.4GHz TQi MXL-6S RTR

Type
Vendor TRAXXAS

This is the 1/10 scale Brushless Electric Powered 2.4GHz TQi Radio Controlled Ready to Run Traxxas E-Maxx Monster Truck. Powered by the factory installed Castle Creations MXL-6s Waterproof Brushless Power System, includes telemetry sensors.

INCLUDES

Traxxas E-Maxx RTR Monster Truck, waterproof MXL-6s Brushless Power Power System, wide track body, 2-channel 2.4GHz TQi radio with two servos, two 8.4V 3000 mAh NiMH batteries, docking base, high power 2200Kv motor, telemetry sensors for speed/RPM, motor temperature, and battery voltage

Chassis: 0.08 (2mm) thick composite with quick release hold downs and scaleable battery components to fit a variety of stick or side-by-side packs Drive: Four wheel shaft drive with Revo spec sealed large diameter outer and center drive shafts Motor: Castle Creations MXL-6s 2200kV brushless, 6S capable, high- strength neodymium magnets, 5mm shaft, aluminum motor can Radio: Traxxas TQi 2.4GHz high output with Traxxas Link automatic model recognition, telemetry enabled 5-ch micro receiver with dual channel 1 inputs, #6510 Docking Base is included and enables model to be tuned from an iPhone 3G/3GS/4/4S, or iPod Touch 2nd/3rd/4th generation (Traxxas Link App must be downloaded if wanting to use an iPhone or iPod Touch) Electronic Speed Control: Castle Creations MXL-6s, cooling fan, 6.5mm gold-plated connectors, high efficiency heatsink Batteries: Two Traxxas Power Cell 3000mAh NiMH 7-cell flat packs with Traxxas High Current connectors, 16.8V total power Ball Bearings: Full set, rubber sealed Shocks: Eight oil-filled, composite bodied with white springs, rubber pressure bladders and double O-ring seals Gearbox: Sealed Differentials: Revo spec with X-ring seals to keep oil in and dirt out, bevel gear design, sealed limited slip Slipper Clutch: Traxxas's patent pending Torque-Control with aluminum slipper clutch friction pads Transmission: Heavy duty brushless ready, two-speed reversing transmission with steel idler gear Tires: Treaded soft compound Maxx 6.3" (160mm) outer diameter 3.3" (85mm) wide Wheels: 3.8" (96mm) diameter black chrome 10 spoke (spokes are in groups of two) 2.7" (70mm) width, 17mm hex **To use wheels with 14mm hexes, order two 14mm Hex Hubs TRAC4954** **and one Nylon Locknut Set, TRAC4149** Bumpers: Plastic front and rear with kickups Suspension: Adjustable Revo Spec sealed pivot balls Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Heavy duty dual servo bell-crank type with ball bearings

VEHICLE- Length: 20.4 (518mm) Width: 16.5 (419mm) Height: 9.8 (248mm) Weight: 7.2 lbs (3290g) approx. without batteries Wheelbase: 13.2" (335mm) Front Tread: 12.9" (329mm) Rear Tread: 13.0" (331mm) side-to-side at wheel centers Front Track: 16.4" (417mm) Rear Track: 16.5" (419mm) side to side at outer edges of wheels Ground Clearance: 2.6" (65mm) BODY- Length: 19.5" (496mm) Width: 7.7" (195mm) at rear wheels, widest point 6.5" (165mm) behind front wheels, widest point Height: 5.3" (136mm)

Radio Batteries: Eight for transmitter Charger: NiMH compatible, high-current connector adapter (DTXC2222) is required if using Duratrax Onyx charger listed in Accessory Completion Guide Misc. Items: Building and track equipment





Related products


Signup for our Newsletter!