HPI Racing 1/8 Ken Block WR8 Flux Brushless 2.4GHz RTR

  • HPI Racing 1/8 Ken Block WR8 Flux Brushless 2.4GHz RTR

$ 479.97   On Sale  $ 865.00

HPI Racing 1/8 Ken Block WR8 Flux Brushless 2.4GHz RTR(HPID0314)

Vendor Sheldon's Hobbies

This is the Electric Powered, 2.4GHz Radio Controlled, 1/8 Scale, Ready to Run WR8 Flux Ken Block Ford Fiesta Rally Car from HPI.


HPI RTR WR8 Flux Ken Block Ford Fiesta Rally Car with 2.4GHz Radio System, ESC, Brushless Motor, Body, 4 AA cells for Transmitter and Instruction Manual

Chassis: 0.12" (3mm) thick silver anodized aluminum with composite front and rear braces and plastic side dirt guards Drive: Four wheel shaft Radio: HPI TF-11 2.4GHz 2-channel system with steering dual rate steering and throttle, and waterproof analog steering servo Motor: Flux Vektor 4000kV brushless ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable with the #100573 Castle Link USB Programmer, HPIC0573 (not included) Differentials: Three, adjustable bevel gear type, oil filled Shocks: Oil-filled, composite body with rear mud guards Suspension: Front and rear sway bars, composite lower suspension arms and solid upper links Tires: Scale Michelin Tarmac Rally, 1.4" (35mm) wide, 3.1" (80mm) diameter Wheels: Blue in color, 1.4" (35mm) wide, 2.2" (56mm) diameter, 12mm hex size Ball Bearings: Full set Pinion Gear: 15 tooth Spur Gear: 46 tooth composite Body: Trimmed and painted with all sponsor decals applied Bumper: Front foam with plastic raised skidplate that allows car to slide over objects in the road Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Warranty: 2-year limited through manufacturer, valid only in USA, Canada and South America

Vehicle- Length: 19.1" (485mm) Width: 8.9" (227mm) Height: 6.8" (172mm) Wheelbase: 11.8" (300mm) Body- Length: 18.9" (480mm) Width: 8" (203mm) behind front wheels, narrowest point 9.1" (232mm) at rear wheels, widest point Height: 6" (153mm)

LiPo Battery: 2-3S LiPo with at least 25C rating and 3500mAh and Deans Female plug Battery Charger: Compatible with selected battery LiPo Charging Bag Building and track equipment

Related products

Signup for our Newsletter!