HPI Racing 1/10 Sprint 2 Drift 2.4 RTR Nissan 350Z Body

  • HPI Racing 1/10 Sprint 2 Drift 2.4 RTR Nissan 350Z Body

$ 219.96

Sorry, the HPI Racing 1/10 Sprint 2 Drift 2.4 RTR Nissan 350Z Body is not currently available.


HPI Racing 1/10 Sprint 2 Drift 2.4 RTR Nissan 350Z Body(HPID0954)

Type R/C Electric Car
Vendor Sheldon's Hobbies

This is the 1/10 scale, electric powered, radio controlled, ready-to-run HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body.

INCLUDES HPI On-Road Sprint 2 Drift Car with the Nissan 350Z Body, motor, electronic speed control, clear body, tires, foam inserts, wheels, 2000mAh battery, wall charger, 4 AA radio batteries pinion gear, 87 tooth spur gear, 2.4GHz radio, servo, two decal sheets, instructions

Chassis: 3/16" (4mm) plastic Drive: Four wheel belt drive Motor: 15 turn Firebolt, brushed Radio: HPI TF-11 2.4GHz with waterproof steering servo and waterproof receiver box Electronic Speed Control: HPI SC-15WP LiPo compatible, waterproof and reversible Battery: 7.2V NiMH 2000mAh Battery Charger: AC wall type Ball Bearings: Full set included Shocks: Oil-filled, plastic bodied, with special springs for drifting Differentials: Planetary gear Transmission: Single speed Tires: Falken Azenis hard compound drift type X-pattern, 1" (26mm) wide, 2.5" (65mm) outer diameter Wheels: Officially licensed TE37 Rays/Volk design 5-spoke brown on color, outer diameter 1.9" (48mm), width 1" (26mm), 3mm offset in front and 6mm offset in rear for wide look seen on full-size drift cars Pinion Gear: 48 pitch steel Spur Gear: 48 pitch, 87 tooth, composite construction Body: Painted and trimmed Nissan 350Z Bumpers: Front, foam Suspension: Fully adjustable Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering: Bell-crank type with servo saver

VEHICLE- Length: 17" (431mm) Width: 7.5" (190mm) - 8.0" (190mm) adjustable using offset wheels Height: 5" (127mm) Wheelbase: 10" (255mm) Front Track: 7.38" (187.5mm) side to side at outer edges of wheel Rear Track: 7.7" (194mm) Front Tread: 6.5" (166mm) Rear Tread: 6.8" (173.5mm) side-to-side at wheel centers Ground Clearance: 0.31" (8mm) BODY- Length: 16.5" (419mm) Width: 7.9" (200mm) Height: 5" (127mm)

Misc. Items: Building and track equipment





Related products


Signup for our Newsletter!